LAWO POWER CORE User Manual page 113

9. Audio Mix Engine
9.5.2 PFL Global Settings
Open the "System -> Definition -> Parameter = PFL Mode" branch of the 'Tree Definition' to assign a control
signal to change the PFL mode, and assign the Auxiliary bus you wish to use for PFL 2 to 5. Note that PFL 3, 4
and 5 are not supported by crystal.
Parameter PFL Mode – reference name for the element.
PFL Mode x Assigns a control signal to activate the corresponding PFL mode.
PFL Off Assigns a control signal to reset any active PFL buttons to off.
PFL Swap to Used in conjunction with the
PFL Sum Assigns a sum bus to PFL 2 (and PFL 3, 4 & 5 on sapphire, sapphire compact and POWER
CORE).
No PFL when Hotfader When checked, PFL ignores the hot fader position. So, if you are working in
closed PFL responds to the actual channel level and not the physical fader position.
POWER CORE User Manual
"Fader Module -> PFL1 Swap
Version: V6.0.0/5
parameter" options.
hot fader mode,
113/459