LAWO POWER CORE User Manual page 378

Access User Off
Once the configuration has been transferred to the system, you can assign the Protools source to a fader strip in
the usual manner. The fader strip MF Keys will then provide the following remote controls:
·
MF 1a = RECORD Enable
·
MF 1b = Insert
·
MF 2a = AUTOMATION Status
·
MF 2b = SELECT
·
MF 3 = channel MUTE
·
MF 4 = channel SOLO (PFL)
The fader strip's rotary control has the same function as on the Mackie-HUI control panel. For a detailed
description of these functions, please consult your DAW manual.
19.5.2 Central Control Functions
The Mackie-HUI™ protocol offers many central control functions such as transport control, automation modes,
etc. These can be assigned to MF Keys or other control signals. Each function is listed as a separate element
within the "System -> Definition" branch of the 'Tree Definition'.
Please see MACKIE HUI Parameters
378/459
This input locks out the ACCESS Key so that the source cannot be assigned to the centre
section. You may use this to limit operator access to source parameters.
for a full list of elements and their assignable functions.
Version: V6.0.0/5
19. Networking POWER CORE
POWER CORE User Manual