LAWO POWER CORE User Manual page 150

11.2.1 Connect -> Matrix Connect
This element allows you to control matrix cross points via MF keys, GPIs or logic functions.
Every "Matrix Connect" can control an internal or external matrix address. Note that the input and output you use
must have their Matrix Enable
Matrix Connect
Condition
Matrix Input
Type: Stereo
Matrix Output
Type: Stereo
External
External Protocol Type
EmBER+ Matrix Nr
Protect
150/459
option set.
Reference name for the element.
Assigns the control signal which will make the matrix connection.
Enter the address of the matrix input (see
Select this checkbox if the matrix input is stereo. Note that the address in the 'Matrix Input'
field is that of the left channel.
Enter the address of the matrix output (see
Select this checkbox if the matrix output is stereo. Note that if the matrix input is mono, it
will be routed to both left and right outputs.
Select this checkbox if the matrix to be controlled is external (i.e. not within the system
frame).
If External is ticked, select the communication protocol type:
·
CAN over TCP/IP - for sapphire, crystal, Nova29 or POWER CORE.
·
2
MNOPL - for mc /Nova73.
·
EmBER+ - for supporting EmBER+ devices.
When using Ember+, you must enter an Ember+ Matrix number (from 1 to 5). This
references the Ember+ Matrix
external matrix type, matrix name, etc.)
When checked, the Matrix Connect cannot be removed by any other system. For example, if
the matrix cross point is visible to other controllers such as the NovaConnect software,
setting Protect will prevent these controllers from changing their status.
Version: V6.0.0/5
Matrix Numbers; 0 = silence).
Matrix Numbers).
element (which defines the local consumer number,
11. Routing Matrix
POWER CORE User Manual