Table of Contents
Advertisement
Inputs Tab
This tab lets you view all of the local RAVENNA streams supplied by Power Core to external devices. These
parameters are configured within On Air Designer.
Stream information includes the number of audio channels, codec type used, audio sample rate, RAVENNA
announcement protocol used, multicast stream address, UDP port number, stream TTL value (in seconds), the
input slots of the RAVENNA device, and the Track numbers of RAVENNA streams being output by Power Core.
The "Streaming" column shows whether streams are in fact actually being transmitted from the Power Core's
RAVENNA interfaces; "0" value corresponds to front-panel port ra0, and "1" corresponds to port ra1. If both
numerals are present, this indicates that the RAVENNA channel is streaming from both front-panel ports.
The "Enable" and "Disable" buttons at the top of the list are used to manually stop and start RAVENNA streams.
This should be used for troubleshooting only, not for controlling stream output while on-air.
400/459
Version: V6.0.0/5
20. Maintenance
POWER CORE User Manual
Advertisement
Table of Contents
