Table of Contents
Advertisement
9.1.8
Assigning DSP to Sources
On POWER CORE, all sources added to the configuration come with full processing: Limiter, Dynamics, EQ and
Delay. If you wish to allocate a de-esser or automixing (to a mono source), then this must be enabled on a
source-by-source basis.
1.
Select the source you wish to edit in the 'Tree Definition' and open the Parm tab.
2.
Use the Op Disable checkboxes to disable operator control of a processing module from the control
surface.
3.
To assign a de-esser or automixing, enable the DeEsser / AutoMix box. This option is available on mono
sources only.
The signal processing is described in more detail later, see
You can keep track of how many resources are available by opening the "Command -> Resources" window.
88/459
DSP
Parameters.
Version: V6.0.0/5
9. Audio Mix Engine
POWER CORE User Manual
Advertisement
Table of Contents
