LAWO POWER CORE User Manual page 198

13. Control Surface Configuration
The Set to "Voice", Set to "Music" or Set to "Off" triggers can be used to override the current assignment - in
the example below, press MF Key 1b to assign the source to the Voice bus; press MF Key 2 to assign the
source to the Music bus; press MF Key 2b to remove the source from both the Voice and Music bus:
Ø
Programming the Logic:
To define which bus is used for Voice (or Music), use the 6 Logic outputs from the source. In our example, Aux 1
is Voice, and Aux 2 Music:
198/459 Version: V6.0.0/5 POWER CORE User Manual