Table of Contents
Advertisement
19. Networking POWER CORE
19.4.4 V__line Devices
The Ember+ V_pro8 GPI element allows an Ember+ consumer to control presets within a Lawo V_pro8.
Note that the V_pro8 must be running Version 1.1.7.24 software or later. Any one of four V_pro8 presets (A to D)
may be triggered from 8 GPIs.
To use this element, the system must be configured as an
Parameter = Local Consumers' branch of the 'Tree Definition').
Global Parameters
EmBER+ V_pro8 GPI
V_pro8 Nr
Local Consumer Nr
GPI Parameters
Select this tab to define the GPIs and presets:
GPI x Setting
GPI x Trigger
POWER CORE User Manual
Reference name for the element.
Select the number of the V_pro8 unit (from 1 to 5). This number must be unique (within the
configuration of this device).
Assign the Local Consumer
Definition -> Parameter = Local Consumers").
Defines which preset (A to D) will be recalled when the GPI Trigger signal is true.
Assigns an input control signal to trigger the GPI.
Version: V6.0.0/5
Ember+ Consumer
(from the 'System -> Definition ->
number
you wish to use (as defined under "System ->
375/459
Advertisement
Table of Contents
