Table of Contents
Advertisement
20.2.2 The Peripherals Menu
There are four information tabs in the Peripherals menu, which display the status of installed hardware extensions
and connected ports.
MADI Tab
The MADI tab gives information on the present state of MADI connections to the Power Core. Ports shown in
green are configured ports with an active link and signal presence. Ports shown in red are configured ports with an
inactive link or signal presence. Ports shown in gray are unconfigured.
·
Port Configured: Shows whether the port has been configured properly using On Air Designer.
·
Port Detected: Shows whether the port has been detected correctly by the hardware.
·
Port Location: Indicates the physical location of the port on the Power Core unit.
·
SFP Present: Shows whether an SFP connection has been installed on the specified port.
·
Signal Present: Confirms port signal activity.
·
Tx64: "Yes" if Tx64 mode is active; blank if Tx56 mode is in use.
·
TxCopy & XOver: Indicates whether this port is mirrored with another port for signal redundancy. This
setting is selected using the On Air Designer software.
·
Temperature: If an SFP is installed, displays current temperature.
392/459
Version: V6.0.0/5
20. Maintenance
POWER CORE User Manual
Advertisement
Table of Contents
