Table of Contents
Advertisement
14.2.3 Erasing an Internal Snapshot
1.
On the Central Module, press and hold both the SNAP LOAD and SNAP SAVE buttons:
You can see which memories are used from the red buttons – in our example, snapshot memories 1, 2, 4 and 5.
Note that the configuration can define an UNLOCK function to protect snapshots from being saved or erased by
accident. If this is the case, then you will need to activate UNLOCK (usually an MF Key) before you can access
SNAP SAVE.
In the configuration, use
'Tree Definition') to activate this option.
In addition, your
user rights
2.
Keep pressing and holding while you select a memory number – e.g. press 4.
The snapshot memory is erased.
3.
To check the erase has worked, press and hold SNAP LOAD.
The memory should now be clear (unlit):
222/459
Snap Unlock
(in the "System -> Definition -> Parameter = Snapshot" branch of the
may prevent you from saving or erasing the 5 local snapshot memories.
Version: V6.0.0/5
14. Snapshots System
POWER CORE User Manual
Advertisement
Table of Contents
