LAWO POWER CORE User Manual page 172

12.4.3 Checking the CAN Service
The InterCom software talks to the system by running a CAN service over the Ethernet connection. To check or
enable this service, use the MtxConAdmin application as follows.
MtxCon (also known as NovaConnect) is the software used to control a Nova17 or Nova29 stand alone
matrix. You can download and install this software from www.lawo.com.
Having installed MtxCon:
1. Open the MtxConAdmin application on your computer:
2. Enter the IP address of the system and select Next:
If you have a redundant Master Board, you should also tick the second entry box and enter the IP address of
the redundant board.
172/459 Version: V6.0.0/5
12. Intercom
POWER CORE User Manual