Ssh Client First-Time Enable - 3Com Switch 4500 Family Manual

Both the publickey and rsa-key keywords indicate specifying the publickey key. They are implemented
with the same method.
Description
Use the ssh client assign command to specify the name of the public key of the server on the client so
that the client can authenticate whether the server to be accessed is reliable.
Use the undo ssh client assign command to remove the mapping between the client and the public
key of the server.
By default, a client does not have the name of the server's public key specified and it uses the IP
address or host name that it used to log in to the SSH server as the public key name.
If a client does not support first-time authentication, it will refuse to access any unauthenticated server.
In this case, you need to configure the public key of the server on the client and associate the public key
and the server so that the client can authenticate the server during login.
Related command: ssh client first-time enable.
Examples
# Specify the name of the RSA public key of the server (whose IP address is 192.168.0.1) as pub.ppk
on the client.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh client 192.168.0.1 assign publickey pub.ppk

ssh client first-time enable

Syntax
ssh client first-time enable
undo ssh client first-time
View
System view
Parameters
None
1-22