Toshiba e-STUDIO2006 Service Manual page 230

(3) Remove 2 screws and take off the fuser
center thermostat (THMO1) [2].
(4) Remove 2 screws and take off the fuser front
thermostat (THMO2) [3].
Notes:
1. Do not remove 4 screws shown in the
figure.
2. When attaching the fuser thermostat,
place the round terminal of the cable
above the thermostat terminal, and attach
in the direction shown in the figure.
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[2]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 110
[3]
Fig. 4-293
Fig. 4-294
Fig. 4-295