Separation Needle - Toshiba e-STUDIO2006 Service Manual

4.7.13

Separation needle

(1) Open the right cover.
(2) Take off the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(3) Take off the registration roller (rubber).
 P. 4-45 "4.6.15 Registration roller
(rubber)"
(4) Take off the transfer roller unit [1].
(5) Peel off the separation needle protection
sheet [2].
(6) Take off the separation needle [3].
4.7.14 Ozone filter
(1) Open the right cover.
(2) Take off the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(3) Take off the ozone filter [1].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[1]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 56
Fig. 4-145
[3]
[2]
Fig. 4-146
[1]
Fig. 4-147