Control Panel - Toshiba e-STUDIO2006 Service Manual

3.7

Control Panel

3.7.1 General Description
The control panel consists of button switches to operate the equipment and select various modes, and
LEDs and an LCD to display codes, values and the states (including each mode) of the equipment. The
button switches, the LEDs and an LCD are mounted on the control panel PC board (HPNL) and are
installed the inside of the control panel.
When the operator's attention is required, graphic symbols appear with messages explaining the
condition of the equipment in the LCD panel.
<20L/23L/25L>
For NAD and ARD, AUD
For other models
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
OUTLINE OF THE MACHINE
Fig. 3-26
Fig. 3-27
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
3 - 28