Toshiba e-STUDIO2006 Service Manual page 621

Adjustment Mode (05) Codes
Sub
05/08 Mode Element
element
05 Adjustment Process Developm
mode ent
05 Adjustment Process Developm
mode ent
05 Adjustment Process Developm
mode ent
05 Adjustment Process Charger
mode
05 Adjustment Process Transfer
mode
05 Adjustment Process Separation
mode
05 Adjustment Process Transfer
mode
05 Adjustment Process Transfer
mode
05 Adjustment Process Image
mode control
05 Adjustment Process Image
mode control
05 Adjustment Process Image
mode control
05 Adjustment Process Image
mode control
05 Adjustment Process Image
mode control
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Sub-
Item Subitem Code
code
2000 - Auto toner sensor auto
adjustment (heater ON)
2001 - Auto toner sensor
manual adjustment
(heater ON)
2020 - Developer bias DC
output adjustment
2040 - Main charger grid bias
output adjustment
2052 - Transfer transformer
DC output adjustment
(Center)
2078 - Separation transformer
DC output adjustment
(Center)
2083 - Transfer cleaning bias
adjustment (Positive)
2084 - Transfer cleaning bias
adjustment (Negative)
2192 - Relative humidity latest
value
2194 - Temperature latest
value
2196 - Drum temperature
latest value
2250 - Laser power
adjustment
2382 - Reverse time of the
drum
Default Acceptabl
Details SRAM
value e value
- - - As the value increases, the sensor output increases
correspondingly.
165 0-255 M Corrects the control value of the auto-toner sensor setup in
05-2000.
* Selection is disable when developer unit is not installed.
131 0-255 M As the value increases, the transformer output increases
correspondingly.
123 0-255 M As the value increases, the transformer output increases
correspondingly.
138 78-255 M As the value increases, the transformer output increases
correspondingly. (Main motor, main charger, discharge
LED, transfer ON)
52 0-255 M As the value increases, the transformer output increases
correspondingly. (Main motor, discharge LED, separation
DC / separation AC ON)
118 78-255 M The larger the setting value is, the higher the value of the
current (more positive) is.
66 0-77 M The larger the setting value is, the higher the value of the
current (more negative) is.
50 0-100 M Displays the humidity value detected by
temperature/humidity sensor.
25 0-50 M Displays the temperature value detected by
temperature/humidity sensor.
25 0-100 M (Unit: degrees C)
118 0-255 M When the value increases, the laser output increases
correspondingly.
13 0-255 M
14-2-5
23LA/
Proce
Contents 23LM/
dure
28LM
17 Y
3 Y
3 Y
3 Y
3 Y
3 Y
3 Y
3 Y
2 Y
2 Y
2 Y
3 Y
1 Y
e-STUDIO2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
23HA /
28HA
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y