Installation And Replacement Of Options <20L/23L/25L/20H/23H/25H> - Toshiba e-STUDIO2006 Service Manual

4.12 Installation and Replacement of Options
<20L/23L/25L/20H/23H/25H>
Important:
• Be sure to turn the power OFF and unplug the power cable before installing and removing of
options.
4.12.1 Reversing Auto Document Feeder (RADF)
(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover [1].
(3) Disconnect the Faston terminal [2].
(4) Remove 3 screws and take off the back
cover [3].
Notes:
When attaching the rear cover, be sure to
insert the two hooks on its right side before
tightening the screws.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-342
Fig. 4-343
[3]
Fig. 4-344
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 129
[1]
[2]
M4
M3
DISASSEMBLY AND REPLACEMENT
4