5.9
List Print Mode (9S)
5.9.1
Operation procedure
Print output
[9][START]
Select
[OK]
[POWER]
"Enter the code"
using the arrow
button.(Select)
You can select the drawer from which to print a list.
<Procedure>
1. [9]+[START]+[POWER].
2. Use the [Arrow] buttons to select "DRAWER" and then press [OK].
3. Use the [Arrow] buttons to select "DRAWER 1" and then press [OK].
CSV output (USB)
[9][START]
Connect
(Code)
[POWER]
USB
<20L/23L/25L, 23LA/23LM/28LM>
201: Adjustment mode (05)
202: Setting mode (08)
(Code)
203: PM support mode
206: Error history (Maximum 30 items)
208: Firmware update log (Maximum 5 items)
211: Version list
214: Total counter list
300: All CSV files
Notes: Precautions when storing information into USB device
•
When storing the setting information of the equipment into a USB device, be sure to obtain
permission from a user in advance.
•
When storing the setting information of the equipment into a USB device, the information is
printed out in a CSV format. Handle and manage the information with extra care.
•
Do not lose or leak the setting information of the equipment.
•
Do not use the setting information of the equipment for purposes other than maintenance or
product services.
•
Provide the information promptly if a user requires so.
•
The buttons on the control panel keep blinking while data are being stored in the USB device.
Do not disconnect the USB device while data are being stored.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[START]
[Digital keys]
(Code)
Key in the start
code to be printed
<20L/23L/25L, 23LA/23LM/28LM>
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
106: Error history (Maximum 30 items)
108: Firmware update log (Maximum 5 items)
111: Version list
114: Total counter list
[START]
[Digital keys]
[START]
Key in the first
code to be printed
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
5 - 15
[START]
[Digital keys]
Key in the end
code to be printed
<20H/23H/25H, 23HA/28HA>
101: Adjustment mode (05)
102: Setting mode (08)
403: 13 code list
(Code)
103: PM support mode
106: Error history (Maximum 30 items)
108: Firmware update log (Maximum 5 items)
111: Version list
114: Total counter list
400: Protocol trace list
401: Service data list
[Digital keys]
[START]
Key in the last
List starts to
code to be printed
be printed
<20H/23H/25H, 23HA/28HA>
201: Adjustment mode (05)
202: Setting mode (08)
503: 13 code list
(Code)
203: PM support mode
206: Error history (Maximum 30 items)
208: Firmware update log (Maximum 5 items)
211: Version list
214: Total counter list
500: Protocol trace list
501: Service data list
300: All CSV files
[START]
[POWER]
List starts to
OFF/ON
be printed
(Exit)
Disconnect
[POWER]
USB
OFF/ON
(Exit)
SELF-DIAGNOSIS MODES
5