Toshiba e-STUDIO2006 Service Manual page 345

<23LA/23LM/28LM/23HA/28HA>
PM support mode activated
[6] + [START] + [POWER] ON
Code input screen
Code input screen
displayed.
[CANCEL] pressed [2]
Main Unit screen
Main unit list displayed
Main unit chosen
[ ] pressed
[
Sub Unit screen
Sub unit list displayed
Sub unit chosen
[ ] pressed
[
Counter Item screen
Counter item
displayed.
Item chosen
[ ] pressed
[
Counter value screen
Counter value
displayed.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[1] [START]
Adjustment
finished
[START]
] pressed
] pressed
] pressed
Fig. 7-2
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
7 - 3
PM support mode:
Select screen for the developer material type
When a pouch type developer
When a cartridge type
material is used (the material
developer material is used,
has already been installed in
select "INSTALLED DEV"
the developer unit), select
as shown below.
"NOT INSTALLED DEV"
as shown below.
PM SUPPORT MODE PM SUPPORT MODE
INSTALLED DEV INSTALLED DEV
NOT INSTALLED DEV NOT INSTALLED DEV
PM SUPPORT MODE
OPEN FRONT COVER
SET DEV. CARTRIDGE
CLOSE FRONT COVER
Auto-toner automatic
adjustment perfomed
Automatic gamma
adjustment perfomed
PREVENTIVE MAINTENANCE (PM)
PM SUPPORT MODE
INSTALLED DEV
NOT INSTALLED DEV
Adjustment
finished
7