Toshiba e-STUDIO2006 Service Manual page 497

(7) Turn OFF the power and remove the USB device.
(8) Perform the initialization of the updating data.
• Turn ON the power while pressing the [0] and [8] buttons simultaneously.
• Key in "9030" and then press the [START] button.
• Press the [OK] button.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
11 - 7
FIRMWARE UPDATING
11