Adu Clutch (Clt4) - Toshiba e-STUDIO2006 Service Manual

4.11.5

ADU clutch (CLT4)

(1) Remove 1 connector [1] and 2 screws and
then remove the "ADU clutch (CLT4)" [2].
Notes:
Be sure the bush is securely in the hole
during installation.
4.11.6 ADU fan duct unit
(1) Remove the inner tray.
 P. 4-2 "4.1.3 Inner tray"
(2) Remove the ADU fan duct [1].
(3) Remove 1 connector [2] and remove the
ADU fan duct unit [3].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[2]
[1]
[2]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 126
Fig. 4-334
Fig. 4-335
[3]
Fig. 4-336