Paper Eject Unit - Toshiba e-STUDIO2006 Service Manual

(4) Remove 2 screws and take off the toner
motor [2].
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the motor
could be damaged.
4.5.3

Paper eject unit

(1) Take off the rear cover.
 P. 4-5 "4.1.9 Rear cover <20L/23L/25L/
20H/23H/25H>"
 P. 4-6 "4.1.10 Rear cover <23LA/23LM/
28LM/23HA/28HA>"
(2) Remove the 2 screws (M3 x 10) and then
remove the paper eject unit [1].
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the screw
hole of frame could be damaged.
4.5.4 Upper drive unit
(1) Take off the rear cover.
 P. 4-5 "4.1.9 Rear cover <20L/23L/25L/
20H/23H/25H>"
 P. 4-6 "4.1.10 Rear cover <23LA/23LM/
28LM/23HA/28HA>"
(2) Take off the exit drive unit.
 P. 4-31 "4.5.3 Paper eject unit"
(3) Remove 3 screws (M3 x 10) and take off the
upper drive unit [1].
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the screw
hole of frame could be damaged.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[2]
Fig. 4-77
Fig. 4-78
[1]
Fig. 4-79
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 31
[1]
DISASSEMBLY AND REPLACEMENT
4