Operation - Toshiba e-STUDIO2006 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO2006:

Table of Contents

Operation

[ 1 ] Drawer

[A] Operation of the drawer feed roller

When the drawer is inserted into the equipment, the lock located in the center of the drawer is released,

and the tray in the drawer is lifted up by the spring. This makes the paper in the tray contact the drawer

feed roller when it is rotated.

The driving force of the main motor (M3) is transmitted through the drawer feed clutch (CL2) to the

drawer feed roller. The drawer feed roller is rotated by this driving force to pull out a sheet of paper from

the drawer. When multiple sheets of paper are fed, the drawer feed clutch is turned ON at each rotation.

One rotation of the feed roller can transport a sheet of paper to the registration roller.

This feeding system has no mechanism specific for detecting the transported paper. Therefore, whether

the paper has been transported to the registration sensor (S2) within a specified period of time or not is

substituted for the paper jam detection.

[1] Drawer feed clutch

[2] Drawer feed roller

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A

OUTLINE OF THE MACHINE

Show Quick Links

Table of Contents