Drawer Feed Roller <23La/23Lm/28Lm/23Ha/28Ha> - Toshiba e-STUDIO2006 Service Manual

4.6.10 Drawer feed roller <23LA/23LM/28LM/23HA/28HA>
(1) Take off the drawer.
(2) Remove each 1 bushing [1] on both front and
rear side, and slide the shaft [2] to the rear
side.
(3) Remove the clip [3].
(4) Remove the 1 collar [4] and take off the
drawer feed roller [5].
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[1]
Fig. 4-103
Fig. 4-104
Fig. 4-105
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 41
[1]
[2]
[3]
DISASSEMBLY AND REPLACEMENT
4