Toshiba e-STUDIO2006 Service Manual page 192

(8) Remove 1 bushing [7] on the front side.
(9) Remove 1 spring [8] and 1 screw [9], and
take off the doctor blade [10].
(10) Take off the gear [11] on the rear side and
then take off the developer sleeve [12].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[8]
[12]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 72
[7]
Fig. 4-193
[9]
[10]
Fig. 4-194
[11]
Fig. 4-195