Toshiba e-STUDIO2006 Service Manual page 131

(4) Disconnect 1 connector [3] on the bottom of
the control panel unit.
4.2.2 Control panel PC board (HPNL)
(1) Take off the control panel unit.
 P. 4-10 "4.2.1 Control panel unit"
(2) Remove 6 screws and take off the control
panel PC board [1].
4.2.3 LED panel
(1) Take off the control panel PC board.
 P. 4-11 "4.2.2 Control panel PC board
(HPNL)"
(2) Release 2 latches and take off the LED panel
cover [1].
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-27
Fig. 4-28
Fig. 4-29
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 11
[3]
[1]
[1]
DISASSEMBLY AND REPLACEMENT
4