Toshiba e-STUDIO2006 Service Manual page 486

10.1.2 Setting
[A] Setting items
Notes:
1. Service notification setting (08-9793) and service notification display (08-9604) must be set to
"1".
2. When using this function, it is required that sending and receiving E-mails are available.
Confirm the details to the administrator.
3. This function will not be performed even if all settings are turned ON (valid) while the power of
the equipment is turned OFF or the equipment is in the Sleep mode during the specified time.
To use this function, do not turn the power of the equipment OFF in the specified time or do
not set the time for this function during the Sleep mode set period.
Set the Service Notification setting in the following setting mode(08).
Items
Service Notification setting
Total Counter Transmit setting
Total counter transmission "day of
the week" setting
Service notification display
Service call transmission
Total counter transmission interval
setting
(Hour/Hour/Minute/Minute)
PM Counter Transmit setting
Total counter transmission date
setting 1
Total counter transmission date
setting 2
Toner near-empty Transmit
(23HA/28HA Only)
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
REMOTE SERVICE <20H/23H/25H, 23HA/28HA>
08 code Contents
9793 0: OFF (Invalid)
1: ON (Valid)
9795 0: OFF (Invalid)
1: ON (Valid)
9881 0: OFF (Invalid)
1: Saturday
2: Friday
4: Thursday
8: Wednesday
16: Tuesday
32: Monday
64: Sunday
Multiple days of the week can be
set by setting the SUM of the
values for the day of the week.
9604 Displays "SERVICE
NOTIFICATION" in the INITIAL
SETUP menu. When "1" is set,
operation and setting are made
available for users.
0: OFF
1: ON
9605 When this function is enabled, it
notifies the error code
corresponding to the service call
by E-mail.
0: OFF
1: ON
9606 00:00-23:59
9797 0: OFF (Invalid)
1: ON (Valid)
9796 0: OFF (Invalid)
1 to 31: Date
9880 0: OFF (Invalid)
1 to 31: Date
8538 0: OFF (Invalid)
1: ON (Valid)
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
10 - 2