Registration Roller (Rubber) - Toshiba e-STUDIO2006 Service Manual

4.6.15

Registration roller (rubber)

(1) Open the right cover.
(2) Take off the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(3) Remove 1 screw and plate [1]. Slide the
registration roller (rubber) [2] to the rear side,
and take it off.
(4) Remove 2 washers [3] and 1 gear [4].
Notes:
When installing the 2 washers [3], it attaches
to the position of a figure.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-115
Fig. 4-116
[3]
Fig. 4-117
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 45
[2]
[1]
[3]
[4]
[3]
[4]
DISASSEMBLY AND REPLACEMENT
4