Toshiba e-STUDIO2006 Service Manual page 297

(5) Check if the value B is within the range of 234 to 246 (the output voltage range of the auto-toner
sensor is 2.34 V to 2.46 V).
(6) If the value B is not within the range of 234 to 246, press the Up or Down button to adjust the
value manually.
Notes:
The relation between the button and the values A and B is as follows.
Button to be pressed
Up
Down
(7) Press the [OK] button.
The drum, developer unit, etc. are stopped and the following is displayed.
(8) Turn the power OFF.
(9) Install the toner cartridge.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Value A
Increased
Decreased
TEST MODE A
MC=
[OK]
Fig.6-5
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
6 - 3
Value B
Increased
Decreased
SETTING / ADJUSTMENT
6