Side Heater Lamp (Lamp2) - Toshiba e-STUDIO2006 Service Manual

(4) Take off the Center heater lamp [2] from the
rear side.
Notes:
1. When removing the Center heater lamp,
hold the Center heater lamp terminals.
2. Take care not to contaminate the Center
heater lamp surface with fingerprints, dust
or such.
3. When installing the Center heater lamp,
face the side with the notch on the
terminal to the rear side.
4.9.5

Side heater lamp (LAMP2)

(1) Remove the fuser cover fuser unit guide.
 P. 4-100 "4.9.3 Fuser unit cover/Fuser
unit guide"
(2) Remove 2 installation screws.
Front side: M3x5
Rear side: M3x8
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
M3x5
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 104
[2]
Fig. 4-275
Rear side
Fig. 4-276
M3x8
Fig. 4-277