Toshiba e-STUDIO2006 Service Manual page 600

05/08 Mode Element Sub element
08 Setting Counter Process
mode
08 Setting Image Image
mode Processiing
08 Setting Image Image
mode Processiing
08 Setting Image Image
mode Processiing
08 Setting Image Image
mode Processiing
08 Setting Image Image
mode Processiing
08 Setting Image Image
mode Processiing
08 Setting Image Image
mode Processiing
08 Setting System User
mode interface
08 Setting System User
mode interface
e-STUDIO2006/2306/2506/2007/2307/2507
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
Sub-
Item Subitem Code
code
Toner cartridge 6977 4
usage history (Lot.
No.)
Clearing of 7000 -
adjustment values
of all image process
(PPC) related 05
codes
Clearing of all 7001 -
gamma
correction table
values (PPC related
areas only)
Error diffusion and 7014 -
dither setting
Last updated date 7051 -
and time
Clearing of 7300 -
adjustment values
of all image process
(Network printer)
related 05 codes
Clearing of 7400 -
adjustment values
of all image process
(network scan)
related 05 codes
Clearing of 7500
adjustment values
of all image process
(Fax) related 05
codes
Screen setting 8523 -
Counter 8549 -
Default Acceptable
Details
value value
4 cartridge earlier 0 0-99999999
PPC - -
PPC - -
Photo mode 1 0-1
PPC 0 0-
4212312359
PRT - -
SCN - -
FAX - -
Toner near-empty 1 0-1
status Message
Hardware key control 0 0-1
when external counter
is installed
14-1-80
SRAM Contents
M 1 digit: Production location indicated.
-0: Cartridge not installed
-1: TESS cartridge
-2: TABS cartridge
-3: TEIS cartridge
-6: Cartridge not detected (when the IC chip information
cannot be detected)
8 digits: Lot No. indicated
SYS/ Clears the adjustment values of the following 05 codes: 05-
M 7000 to 7299, 7600 to 7999 After executing this code.
clear
SYS Clears all the gamma correction table values in the PPC
clear related areas of the memory.
SYS Sets the image reproduction method at photo mode.
0: Error diffusion 1: Dither
SYS Last updated date and time of automatic tone correction
data. (YYYYMMDDHHMM)
YYYY: Year, MM: Month, DD: Date,HH: Hour: MM: Minute
SYS Clears the adjustment values of the following 05 codes: 05-
clear 7300 to 7399, 05-8200 to 8299 After executing this code.
M
clear
SYS Clears the adjustment values of the following 05 codes: 05-
clear 7400 to 7499, 05-8300 to 8499 After executing this code.
SYS Clears the adjustment values of the following 05 codes: 05-
clear 7500 to 7599 After executing this code.
SYS 0: ON
1: OFF
SYS 0: No control
1: Mode switch key is disabled.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
20L/ 20H/
Proce
23L/ 23H/
dure
25L 25H
4 Y Y
3 Y Y
3 Y Y
1 Y Y
2 Y Y
3 Y Y
3 Y Y
3 - Y
1 Y Y
1 Y Y