Toshiba e-STUDIO2006 Service Manual page 146

4.3.7 Platen sensor (S7) <20H/23H/25H, 23HA/28HA only>
(1) Take off the original glass.
 P. 4-15 "4.3.1 Original glass"
(2) Remove actuator [1] and remove 1
connector [2].
(3) Release 2 latches and then remove the
platen sensor [3].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[2]
[3]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 26
Fig. 4-65
[1]
Fig. 4-66
Fig. 4-67