Toshiba e-STUDIO2006 Service Manual page 418

[E552] Paper remaining jam on the transport path (when the cover is closed)
Classification
Other jam
Step Check Item
Jamming transport path
1
Sensor in the jamming area
2
MAIN board
3
Notes:
If the jam is occurring in the PFU, check the board in each unit.
Parts to be replaced
Sensor in the jamming area
MAIN board
Jamming area
Registration area Right cover
Exit area Right cover
ADU Right cover
PFU PFU side cover
PFU PFU side cover
PFP PFP side cover
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
ERROR CODE AND TROUBLESHOOTING
Error content
Paper remaining on the transport path when printing is finished
(when the cover is closed)
Result
Remark
Refer to the table below.
Cover
Registration sensor
Exit sensor
ADU transfer sensor
PFU drawer feed sensor
PFU drawer feed sensor
PFP upper drawer feed sensor
PFP upper lower feed sensor
8 - 40
Measure
Open the cover of the unit/area whose
picture is flashing on the control panel
and remove any paper on the transport
path.
• Sensor check (Refer to the table
below)
• Harness check
• Connector check
• Harness check
• Connector check
• Board check
Sensor
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Next
Step
Test mode/Input check
03-[A]/[A]
03-[A]/[B]
03-[1]/[C]
03-[4]/[A]
03-[4]/[A]
03-[1]/[E]
03-[2]/[C]