Toshiba e-STUDIO2006 Service Manual page 401

Proce
Check item
dure
3 MAIN board, 2nd transport
sensor
Parts to be replaced
MAIN board
2nd transport sensor
Rollers on the transport path
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Result
1. Check if any of the connectors on the MAIN
board is disconnected.
20L/23L/25L/20H/23H/25H: CN26
23LA/23LM/28LM/23HA/28HA: CN15
2. Check if the connector pins are
disconnected or the harnesses are open
circuited.
3. Check if the conductor patterns on the
MAIN board are short circuited or open
circuited.
4. Replace the 2nd transport sensor.
5. Replace the MAIN board.
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
8 - 23
Measure
Remark
ERROR CODE AND TROUBLESHOOTING
Next
Step
8