Laser Precautions - Toshiba e-STUDIO2006 Service Manual

3.9.2

Laser precautions

- Laser precautions
A laser diode is used for this equipment and radiates an invisible laser beam.
Since it is not visible, be extremely careful when handling the laser optical unit components,
performing operations or adjusting the laser beam. Also never perform the procedure with other
than the specified manuals because you could be exposed to the laser radiation.
The laser optical unit is completely sealed with a protective cover. As long as only the operations
of specified manuals are performed, the laser beam is not leaked and you are in no danger of
being exposed to laser radiation.
The following cautionary label for the laser is attached to the frame which you can see when
opening the right cover.
The following laser warning label is on the frame visible when the right cover and the toner
supply cover are opened.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-40
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
3 - 39
OUTLINE OF THE MACHINE
3