Toshiba e-STUDIO2006 Service Manual page 145

(6) Release the harness from the harness guide,
and take off the scan motor [4].
Notes:
When installing the scan motor, tighten the
bracket fixing screw and the earth wire
together.
Notes:
When attaching the fuser thermostat, place
the round terminal of the cable above the
thermostat terminal, and attach in the
direction shown in the figure.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-62
Fig. 4-63
Fig. 4-64
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 25
[4]
DISASSEMBLY AND REPLACEMENT
4