Toshiba e-STUDIO2006 Service Manual page 210

Notes:
1. Be sure to install the thermistors so that
their bosses are securely inserted into the
frames.
Notes:
Look at the thermistors in the direction of the
blue arrow after they are installed in the fuser
unit, and check that their gauge heads
(indicated by the red arrow) contact the fuser
roller. If there are gaps between them or the
thermistors are tilted, reinstall them.
[1] Center/Side thermistor
[2] Edge thermistor
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[1]
[2]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 90
Fig. 4-239
Fig. 4-240