Toshiba e-STUDIO2006 Service Manual page 571

05/08 Mode Element Sub element
08 Setting System Paper
mode feeding
08 Setting System ID card copy
mode
08 Setting System ID card copy
mode
08 Setting System FAX
Mode
08 Setting Printer Paper
mode feeding
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Sub-
Item Subitem Code
code
3977
3981
3982
TX/RX mode setting 3983
4010 -
Default Acceptable
Details
value value
Keeping the current 0 0-1
paper size for the
bypass tray
Print position setting Refer to 0-1
contents
Scan range setting Refer to 0-3
contents
Easy manual TX/RX Refer to 0-1
mode contents
Default setting of paper 0 0-4
source
14-1-51
SRAM Contents
- Sets whether or not to keep the paper size set for the
bypass feed even after the paper is removed or the power
is turned OFF. If this code is enabled, 08-3976 will be
disabled.
0: Disabled
1: Enabled
SYS Sets the print position of output images for ID card copying.
0: Left-Top
1: Center-Center
2: Center-Top (Not Use)
3: Left-Center (Not Use)
CND: 1
Others: 0
SYS Sets the scan range for ID card copying.
0: 106mm * 74mm
1: 120mm * 90mm
2: 140mm * 100mm
3: 200mm * 140mm
TWD: 1
CND: 3
Others: 0
SYS Sets the TX/RX mode of the fax function.
0: EASY MODE
1: ADVANCED MODE
<Default>
CND: 0
Others: 1
SYS 0: A4/LT
1: Drawer 1 (Upper)
2: Drawer 2 (Lower)
3: PFP Drawer 1 (Upper)
4: PFP Drawer 2 (Lower)
* In 20L/23L/25L, 08-4010 is enabled only when the ADF is
used. The upper drawer is selected when it is not.
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
20L/ 20H/
Proce
23L/ 23H/
dure
25L 25H
12 Y Y
1 Y Y
1 Y Y
1 - Y
1 Y Y
e-STUDIO2006/2306/2506/2007/2307/2507