Paper Empty Sensor (S5) - Toshiba e-STUDIO2006 Service Manual

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO2006:
Table of Contents

Advertisement

4.6.17

Paper empty sensor (S5)

(1)
Open the right cover.
(2)
Take off the drawer.
(3)
Take off the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(4)
Take off the registration roller (metal)
 P. 4-44 "4.6.14 Registration roller (metal)"
(5)
Remove one screw and then slide the
registration guide [1] towards the rear and
remove it.
Notes:
When installing the registration guide, insert
the latch at the rear side into the damp
heater bracket [2], slide it to the front side,
and then insert the two bosses into the damp
heater bracket.
(6)
Remove 1 screw and then take off the damp
heater unit or dummy plate [3] while sliding it
to the rear and lifting it down.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-121
Fig. 4-122
[3]
Fig. 4-123
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 47
[1]
[2]
DISASSEMBLY AND REPLACEMENT
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents