Toshiba e-STUDIO2006 Service Manual page 251

(4) Disconnect the Faston terminal [2].
Remove 3 screws and remove the back
cover [3].
Notes:
When attaching the rear cover, be sure to
insert the two hooks on its right side before
tightening the screws.
(5) Disconnect 2 connectors [4].
(6) Remove 3 screws and remove the PFU gear
unit [5].
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-348
[3]
Fig. 4-349
Fig. 4-350
Fig. 4-351
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 131
[2]
M4
M3
[4]
[5]
DISASSEMBLY AND REPLACEMENT
4