Separation Finger - Toshiba e-STUDIO2006 Service Manual

(5) Place the fuser unit facing the original
direction, take off the base unit [1].
Notes:
When installing the base unit, make sure that
the sheets [1] are attached as references of
the rib [2] and boss [3].
4.8.6

Separation finger

(1) Take off the base unit.
 P. 4-82 "4.8.5 Base unit"
(2) Pull out the separation finger [1] from the
groove.
(3) Remove the spring [2].
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[1]
Fig. 4-220
[2] [2]
Fig. 4-221
[1]
Fig. 4-222
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 83
[3]
[1]
[2]
DISASSEMBLY AND REPLACEMENT
4