Setting - Toshiba e-STUDIO2006 Service Manual

A sign of the status that the toner cartridge is nearly empty (= the behavior of the toner lamp) appears
when the value of counter for period of toner cartridge rotation time has exceeded the thresholds
previously written in the toner cartridge PC board (CTRG). When a used cartridge refilled with new
toner is used, that is the value of counter for period of toner cartridge rotation time in the toner cartridge
PC board (CTRG) had already exceeded the threshold to determine the near-empty status of the toner
at this moment, the sign of the near-empty status appears immediately after the installation of this
cartridge. When a non-recommended toner cartridge is used, the equipment may stop normal
operations. The toner remaining check function, automatic remote supply order to TOSHIBA sales
representatives and image optimization function may also be disabled.
The toner near-empty status threshold setting (08-5155) is provided to adjust the timing for displaying
the toner near-empty status as follows.
The toner near-empty status threshold setting (08-5155)
0: The period from the appearance of the toner near-empty sign to the actual complete
consumption of the toner is set long.
1: Normal (Default)
2: The period from the appearance of the toner near-empty sign to the actual complete
consumption of the toner is set short.
3: The sign of the status that the cartridge is nearly empty does not appear.
Note that the shorter the period described above is set, the more frequently the toner in the cartridge
may run out before the sign of the near-empty status of the toner appears because the way the toner
remains in the cartridge differs every time.
When the value of the toner near-empty status threshold setting (08-5155) is set at "3", the toner
remaining check function is disabled.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
3 - 59
OUTLINE OF THE MACHINE
3