Image Quality Adjustment (Scanning Function) - Toshiba e-STUDIO2006 Service Manual

6.6

Image Quality Adjustment (Scanning Function)

6.6.1 Gamma balance adjustment
The density is adjusted by adjusting the gamma balance. The adjustment is performed by selecting its
density area from the following: low density, medium density and high density.
Black
Original mode
Text/Photo Text
7485-0 7486-0
7485-1 7486-1
7485-2 7486-2
Notes:
Changing the adjustment setting influences the adjacent density area slightly.
E.g.: When the value of the medium density is larger, the adjacent areas in the low density and
high density range will become slightly darker.
<Procedure>
Procedure is same as that of  P. 6-26 "6.4.5 Gamma balance adjustment".
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Gray Item to be
Scale adjusted
Photo
7487-0 7488-0 Low density
7487-1 7488-1 Medium density
7487-2 7488-2 High density
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
6 - 31
<Adjustment Mode (05)>
Remarks
The larger the value is, the density of
the item to be adjusted becomes darker.
Acceptable values:
0 to 255 (Default: 128)
SETTING / ADJUSTMENT
6