Pressure Roller - Toshiba e-STUDIO2006 Service Manual

(5) Place the fuser unit facing the original
direction, and then take off the base unit [1]
from the front side.
4.9.7

Pressure roller

(1) Take off the base unit.
 P. 4-105 "4.9.6 Base unit"
(2) Remove 2 springs [1].
(3) Take off 2 pressure levers [2].
(4) Take off 2 arms [3].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[1]
[2]
[1]
[3]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 106
Fig. 4-281
[2]
Fig. 4-282
[3]
Fig. 4-283
[1]