Introduction To Axes Group Parameters - Omron NY532-1500 User Manual

3 Configuring Axes and Axes Groups
3-3-2

Introduction to Axes Group Parameters

 Axes Group Parameters
Classification
Axes Group Basic Set-
tings
Axes Group Operation
Settings
Refer to 5-3 Axes Group Parameters for details on axes group parameters.
 Settings Required to Use an Axes Group
The following settings must be made to use the axes groups that are created with the Sysmac
Studio.
Classification
Axes Group
Basic Settings
Precautions for Correct Use Precautions for Correct Use
Set appropriate values for the maximum interpolation velocity, stop method, and other items
based on the operating conditions.
3-20
Axes Group Number
Axes Group Use
Composition
Composition Axes
Maximum Interpolation Velocity
Maximum Interpolation Acceleration
Maximum Interpolation Deceleration
Interpolation Acceleration/Deceleration Over
Interpolation Velocity Warning Value
Interpolation Acceleration Warning Value
Interpolation Deceleration Warning Value
Axes Group Stop Method
Correction Allowance Ratio
Parameter name
Axes Group Axes group numbers are automatically set in the
Number order that the axes groups are created.
Axes Group Use Select Use.
Composition Select the axis composition to control.
Composition Axes This parameter sets the axes to assign to the axes
group.
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)
Parameter name
Setting Page
P. 5-30