Omron NY532-1500 User Manual page 409

The maximum value of the ring counter for the Encoder Input Terminal is set on the EtherCAT Tab Page
in the Sysmac Studio.
The setting is as follows:
Index
0x4003 Max Count Setting (maxi-
mum value of the ring
counter)
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)
Object name
Set this parameter to the same value as the Modulo Maximum
Position Setting Value in the Servo Drive Settings of the axis
parameters of the MC Function Module.
Appendices
Set value
A
A-27