6-5-2
Valid Positions for Each Axis Type
The following table lists the valid positions for each axis type.
Axis type
Servo axis
Virtual servo axis
Encoder axis
Virtual encoder axis
*1 For a virtual servo axis, the actual position is the same as the command position. (However, there is some-
times calculation error because processing is performed with long reals in the MC Function Module.)
*2 This is used when there is no actual encoder.
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)
Types of positions
Command position
Applicable
Applicable
Cannot be used.
Cannot be used.
6 Motion Control Programming
Actual position
Applicable
*1
Applicable
Applicable
*2
Applicable
6
6-17