Linear Interpolation - Omron NY532-1500 User Manual

9 Motion Control Functions
9-6-2

Linear Interpolation

Linear interpolation is used to move 2 to 4 of the logical axes A0 to A3 in a straight line between a start
point and an end point. Either absolute or relative positioning is possible. You can specify the interpola-
tion velocity, interpolation acceleration, interpolation deceleration, and jerk.
The MC Function Modules uses the following three kinds of linear interpolation instructions.
• MC_MoveLinear (Linear Interpolation)
You can specify the MoveMode input variable to select between linear interpolation to an absolute
value or linear interpolation to a relative value. This instruction is unique to the MC Function Module.
• MC_MoveLinearAbsolute (Absolute Linear Interpolation)
This instruction performs linear interpolation to an absolute value. This instruction is defined in the
®
PLCopen technical specifications.
• MC_MoveLinearRelative (Relative Linear Interpolation)
This instruction performs linear interpolation to a relative value. This instruction is defined in the
®
PLCopen technical specifications.
The following figure shows linear interpolation of 2 axes from point A to point B.
Td
Fa1
Ta
Axis A1 motion
Axis A0 motion
For details on linear interpolation, refer to the MC_MoveLinear (Linear Interpolation), MC_MoveLinear-
Absolute (Absolute Linear Interpolation), and MC_MoveLinearRelative (Relative Linear Interpolation)
instructions in the NY-series Motion Control Instructions Reference Manual (Cat. No. W561).
9-54
Y
La1
F
A
La0
Fa0
Ta
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)
B
X
Td