4 Checking Wiring from the Sysmac Studio
4-1-4
Starting the MC Test Run Function
The MC Test Run Mode is started from the Sysmac Studio.
1
Start the Sysmac Studio and open a project in which the axis settings are completed.
2
Select Online from the Controller Menu. The Sysmac Studio goes online with the Controller.
3
Select MC Test Run
When the following caution dialog box appears, read the message carefully. After you confirm
safety, click the OK Button.
The MC Test Run Tab Page is displayed.
4-6
−
Start from the Controller Menu.
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)