Axes Group Variables
Use these variables to handle multiple axes as a single group.
You can use either the system-defined variables or the variables that are set on the Sysmac Studio
to specify the Axes Group Variables in the user program.
You can change any of the Axes Group Variables that you create on the Sysmac Studio.
• Axes Group Variables in the system-defined
variables
• Default Axes Group Variables when axes
groups are created on Sysmac Studio
Refer to the NY-series Industrial Panel PC / Industrial Box PC Software User's Manual (Cat. No. W558)
for details on the variables that are used by an NY-series Controller.
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)
6 Motion Control Programming
: _MC_GRP[0] to _MC_GRP[31]
: MC_Group000 to MC_Group031 (default)
6
6-19