Relative Positioning - Omron NY532-1500 User Manual

4-3-5

Relative Positioning

1
Click the Relative positioning Tab on the MC Test Run Tab Page.
The following dialog box will appear.
2
Select the axis to perform relative positioning.
3
Click the Servo ON Button to turn ON the Servo.
4
Enter the target travel distance, target velocity, acceleration rate, deceleration rate, and jerk,
and then click the Apply Button.
5
Click the
Check to see if the travel distance agrees with the settings.
NY-series Industrial Panel PC / Industrial Box PC Motion Control User's Manual (W559)
Button. Relative positioning will start.
4 Checking Wiring from the Sysmac Studio
4
4-11